Overview
- Click Measure.
- Under Insights, click Reports.
- Choose Fuel reports under the report category.
This report is useful to see the amount of fuel consumed when certain events occur in relation to the total consumption. In order for this report to display fuel information pertaining to an event, the events need to be configured as fuel events.
The events must have the following characteristics:
- The event type is detailed
- It records the start odometer value.
- It records the end odometer value.
- It records pulse counts.
- It records the event data after a delay of 2 seconds.
The report is filtered for VT, AT, and MiX2000 units.
Furthermore, the report has a selection option to display the consumption based on distance or duration. If a user selects duration as an option, the assets which are selected must be configured to record engine hours in order to display fuel consumption based on duration.
Users
- Fleet Managers
- Fleet Coordinators
- Controllers
Columns
Default
- Date – the report is only available on a daily roll-up
- Asset
- Total Fuel Consumption (either based on duration or distance)
o Duration or Distance
o Fuel Consumption Measured (L/h) or (km/l or l/100km)
o Fuel Used (Litres) - 2 selected events (either based on duration or distance)
o Duration or Distance
o Fuel Consumption Measured (L/h) or (km/l or l/100km)
o Fuel Used (Litres)