This tab is only displayed when selecting a configuration group that has an FM unit assigned to it.
Also note that you need the permission "Assets - Meter readings" to access this functionality. Access and Update permissions will allow users with site-level access or higher to update the odometer and engine hours.
- Click Monitor.
- Under Fleet Admin, click Assets.
- Select the specific asset by clicking the link in the asset description column.
- Click the Meter readings tab.
- Enter the required odometer value - change the measurement unit by clicking on the downward arrow next to the current measurement setting displayed next to Set odometer.
- The current odometer reading is displayed below the text box. As you type the new value the system will automatically calculate the difference and display in red if the previous value is greater than the newly entered value as a warning.
- Type the new engine hours value - change the measurement unit by clicking on the downward arrow next to the current measurement setting displayed next to Set engine hours.
- The current engine hours reading is displayed below the text box. As you type the new value the system will automatically calculate the difference and display in red if the previous value is greater than the newly entered value as a warning.
- Click the Comms Log button if you want to monitor the meter reading upload or ensure that it has been applied successfully.
- Click Save
This will create a schedule in the back-end that will be sent to the unit. The edited meter reading will only take effect if the asset connects to the server within 15 minutes of this request in order to prevent an incorrect value being sent to the asset. The asset's ignition needs to be off and the unit armed.