The Fleet Manager Keypad (FM Keypad) is a smart data input and display unit. The drivers can use the FM Keypad to select driving reasons for their trips. The FM Keypad also has voice functionality. If the voice functionality has been enabled, you can specify which numbers can be dialed. First enable the functionality and then specify which numbers can be dialed.
Dial pre-defined telephone numbers
- Click Monitor.
- Under Fleet Admin, click Assets.
- Select the specific asset by clicking the link in the asset description column.
- Click on the Keypad numbers tab. Note that this tab is only available if you have connected a keypad to the CP line in your mobile device template in Config Admin in the peripheral library.
- Check the box "Enable the driver to dial 4 pre-defined telephone numbers from the keypad".
- Enter four keypad numbers.
- Click Save.
If pre-defined telephone numbers were specified in the configuration group, and the preference is for the asset to be configured with the pre-defined numbers from the configuration group then click on "Revert these keypad numbers to those of the configuration group".