- Click Manage.
- Under Config Admin, click Templates.
- Click on Mobile device template.
- Search for the relevant template and click on the downward facing actions arrow next to the relevant row.
- Select Edit.
- Click on the link next to S1 or S3.
- Select the device in the list.
- Select the options specific to the device.
- Click Save.
Devices supported on S1 or S3
The following devices are be available for use on either S1 or S3 for BAS capable device types (FM33xx and above) including the Tracer variants - where the peripheral device is compatible with the mobile device type:
- MiX Vision
- FM 3D TCO - VDO
- FM 3D TCO - Stoneridge
- DTCO/CAN script
- Siemens DTCO
- Stoneridge DTCO
- Extended Driver ID
- Euroscan Temp sender (no hardware in STB to test with)
Notes:
- Messaging devices including Rovi I and Rovi II will continue to function on S1 and cannot be used in conjunction with each other.
- 3D TCO - VDO and 3D TCO - Stoneridge and DTCO/CAN and DTCO- Stoneridge and DTCO-Siemens cannot be used together i.e you have to choose one.
- Modems remain on S3 only - Iridium, Satamatics and Wi-Fi.
The following devices are supported on S1:
- FM Terminal
- MiX Rovi
- MiX Rovi II
- Other serial device
The following devices are supported on S3:
-
- Air Weigh truck scale
- DTCO+CAN Script
- Euroscan/Transcan temperature sender
- Extended Driver ID reader
- FM Wireless kit
- GPS NMEA output
- Iridium modem
- Kimax I
- Kimax II
- Other serial Device
- Satamatics Modem
- Serial TCO
- StoneRidge TCO
- Trailer ID Script
- Trailer ID Script - Enhanced
- VDO Dayton
- Garmin