Once the config has been accepted the MiX Rovi will be enabled for Location speed monitoring.
- Click Manage.
- Under Config Admin, click Configuration groups.
- Click on the downward actions arrow located next to the required configuration group.
- Click on Compile.
- Select if you want to upload the configuration to all the assets in the configuration group immediately or if you want to save the compiled configuration to upload at a later stage.
Remember that you can also compile config for a single asset by selecting the arrow next to the asset name:
- Click Submit.
- When the config upload is scheduled in the above step it automatically creates a simultaneous Large File Transfer upload to the MiX Rovi II device.
- Monitor the progress of the file transfer as follows:
- Click Manage.
- Under Scheduler, click File transfers.
The file, unlike config is only transferred to the MiX Rovi device whilst the OBC is In-Trip. As soon as the progress reaches 100% a script will execute on the MiX Rovi device and install the location files. As soon as the OBC config is loading and the Rovi Large File Upload completes, the unit will be enabled for Location Speed Monitoring and the location shapes will be visible on the MiX Rovi.
NOTE: The MiX Rovi is able to handle interruptions to the large file transfer between trips. The only requirement is that is continues to have a power supply. There may be a delay between the configuration uploading and the Large File Transfer being completed. The events will only be generated once both the config upload and the large file transfer have been completed.