Decide which location-based over speeding option you would like to adopt.
Each option is mutually exclusive and cannot be used in conjunction with the other:
- Location speed monitoring using on-board computer (OBC).
- Location speed monitoring using MiX Rovi – when a MiX Rovi is connected, this option allows the location data to be stored on the Rovi device. For more information on how poly points are calculated download the attachment at the bottom of the page, called Application Note: FM On-Board Geofence Space Calculations.
Option 1 - Location speed monitoring using OBC
Read Enabling location speed monitoring using OBC
Option 2 - Location speed monitoring using MiX Rovi
This feature is only available for MiX Rovi II devices and up. This feature is visible, but not editable at library level.
- Click Manage.
- Under Config Admin, click Templates.
- Click the Mobile device template tab on the left.
- Choose the relevant mobile device template that you would like to view or edit.
- When using a MiX 4000 or MiX 6000 device make sure that the unit is connected and recording speed using the road speed parameter on the speed line:
- Make sure the F1 line has been connected and recording speed using the road speed parameter when using an FM unit:
Click on the image to view it in full screen if the article is open in your browser:
- Click the the MiX Rovi peripheral device to enable the location monitoring feature on the Rovi. (If this option is not available, make sure it has not been enabled on the on-board computer, by clicking on the mobile device properties.) Enabling this feature will automatically make a Location library visible at library level in Config admin. Go to the Location library and make the relevant locations available.
Notes:
- This feature requires a minimum Breakaway set DDR version of E15.02.11.x.
- This feature requires a minimum Rovi II Application version of 1.8.
- Changing a mobile device template will automatically update the configuration settings for all the assets using the template. All the assets will then show a "Configuration changed" status and will require the configuration to be compiled and uploaded for the changes to be effective on the mobile device.
Application Note: FM On-Board Geofence Space Calculations