To view which videos will be requested for each event in a configuration group or how the video configuration is set up, go to the configuration groups page:
- Click Manage.
- Under Config admin, click Configuration groups.
- Select the relevant config group that contains the video settings.
- Click the downward action arrow next to the config group.
- Select Video event configuration.
- This will open a window with a summary of the templates, the mobile device type, channels used and all the events and which cameras they use for the video request.
- Click Download report to automatically download a printable PDF version of the report to your computer.
Click on the image to view it in full screen if the article is open in your browser
:
Peripheral data:
-
Name of peripheral connected to the SP line in the mobile device template.
-
Channel to camera name (max 5 channels)
-
For the general Streamax camera peripheral it is possible that not all of the channels might have a camera name assigned, in that case it will show “None“ in the camera channel row.
-
MiX Vision events:
-
A list of all the events of type MiX Vision from the event template, which cameras are enabled for the events and which are also assigned to a channel on the peripheral of the mobile device.
OBC events:
-
A list of all the other events from the event template, which cameras are enabled for the events and which are also assigned to a channel on the peripheral of the mobile device.
-
A row for the Record trip driver picture event and which camera is selected for it - its a default event so it will never be part of the event template.
Edge case:
-
If the report is run on a config group that has a mobile device with an SP line, but no camera peripheral is connected. you will see the following message: “No camera peripheral is connected to the SP line for this configuration group yet.”