- Used with Driver ID and a wired ignition install configuration.
- The main harness includes a starter interrupt relay socket (relay not included).
- Refer to the installation manual for wiring instructions.
- The immobilizer will be activate after a configured arming period at the end of every trip.
- Starting will not be possible without the driver presenting a valid Driver ID.
- The identification of a valid driver will deactivate the immobilizer and allow starting of the vehicle.
- Restarting after trip-end but during the arming delay will not require the driver to be re-identified.
Note: If immobilization is not required, the relay need not be added and no additional configuration is necessary.