*Driver and passenger plug supported.
- Code plug socket based system
- The list of authorized drivers is stored on the MiX 6000 and not on the plug.
- Any valid driver plug will be read and the ID assigned as driver for the trip.
- The buzzer will beep for a configured duration or until a valid driver plug is inserted (Default is zero seconds or no beep).
- Successful reading of a valid driver plug is acknowledged by two short beeps.
- No beep will sound if an invalid/incorrectly programmed driver plug is inserted.
- The red LED on the code plug socket will flash until a valid driver plug is inserted.
- The red LED turns off once a valid driver is associated with the current trip.
- Extended driver ID support.
- RF ID reader or DriveMate (via serial port) or DTCO etc.